News

PVC True Union ball valves are available in sizes ranging from ½” to 4”, providing a convenient and effective way to control system flow. The valve can be easily opened or closed by simply turning the plastic handle a quarter turn. These valves feature double union joints, making them easy to service and maintain, whether repairing or replacing them. The main part of the valve, called the bracket, houses the handle and ball and can be removed from the line for easy service without disassembling the entire system. True Union ball valves are available with socket or threaded ends and it is recommended to use PVC glue or thread tape when installing the valve in the pipe. These valves are extremely durable and tested to withstand pressures up to 150 PSI, making them suitable for use in industrial applications where quick response and ease of repair are critical.

One piece flanges features are as follows: 1. easy and convenient installation, only need to butt the flange with the flange on the other side of the pipe. 2. It is suitable for the scenario of smaller pressure and shorter pipeline, generally used in water...

The Venturi fertilizer injector and micro-irrigation system are installed parallel to the water supply pipe control valve at the entrance to the irrigation area. When the control valve closes, a pressure difference is created, causing water to flow through the venturi fertilizer injector. This flow creates a vacuum in the venturi tube, drawing the fertilizer solution from the open bucket into the pipe system for fertilization.

What are the Performance in application scenarios?

PPH pipe is widely used in production and life, its excellent performance and good experience makes it become the first choice of piping material in many fields.

Pulse dampers are commonly used to eliminate pipeline pulsation and are a mandatory accessory for metering pumps. There are airbag type, diaphragm type , air type pulse dampers.

Guide of select plastic ball valve

In general, if it is a case of not closing tightly, first confirm whether the plastic valves has been closed in place, if there is still a leak that can not be sealed after it has been closed in place, then check the sealing surface again. Some PVC valves have removable sealing pairs, so take them out for grinding and test them again. If the valve is still closed, it must be returned to the factory for repair or replacement of the valve, so as not to affect the normal use of the valve and the emergence of industrial accidents and other problems.

How to install the plastic check valve? Plastic Check valve is an important valve in the process of water transport, It is an important component in preventing backflow of water. there are UPVC CPVC PPH PVDF check valve with ball type plastic check valves and...

Plastic Flanges include blind flanges, one piece flanges, vanstone flanges, flange is to make the pipe and pipe interconnection parts, connected to the pipe end. Flange connection or flange joint, refers to the flange, gasket and bolt three interconnected as a group of combined sealing structure of the detachable connection; flange on the eyelets, bolts to make the flange tightly connected, flange between the use of gaskets to seal. This can play a good sealing role, where in the two planes around the use of bolted connections at the same time closed connection parts, generally known as flange.

How to determine the installation location of the check valve? What is the difference between installing a check valve before the pump and installing one after the pump, and where is pre-pump installation applicable? Check valves are usually used in conjunction with other valves. Where should a check valve be installed when used in conjunction with other valves?